How to Adjust

XEBEC Brush™ Crosshole

If burrs remain

① Increase rotational speed to the maximum in increments of 1,000min-1

② Increase the number of passes.

If the workpiece cannot be deburred even by the above-mentioned procedures, the machining condition may be incorrect or the burr size is too large.

Change the brush with higher grinding power.
The grinding power of the Brush: Blue > Red

.

To extend tool life

Decrease the rotational speed in 10% increments or increase the feed rate in 10% increments

XEBEC Brush™ Crosshole

Ideal for deburring, polishing and cutter mark removal on inner diameter and counterbored part.

→Details






Other Support

If you have any inquiry, please do not hesitate to contact us.