How to adjust

XEBEC Brush Surface™

If burrs remain

1. Increase rotational speed
Increase the rotational speed to the maximum.
If burrs still remain, then decrease the feed rate.
2. Check the rotation direction of the Brush

For horizontal burrs, up cut is recommended so that the brush tip pushes up the burrs.

3. Change the Brush color
Change the Brush with higher grinding power.
The grinding power of the Brush : Blue > White > Red > Pink
Make sure to select Brush color based on the workpiece material and burr root thickness.

If the edge is too rounded

1. Increase feed rate

To make sharp edge, increase the feed rate in 1,000mm/min increments within the range where burrs can be removed.
Increasing the feed rate also helps to reduce the cycle time.

2. Decrease rotational speed

Decrease the rotational speed in 10 to 20% increments within the range where burrs can be removed.

3. Check the Brush color

The grinding power of the Brush : Blue > White > Red > Pink
Select Brush color based on the workpiece material and burr root thickness.

To extend tool life

1. Increase feed rate

Increase the feed rate in 1,000 mm/min increments within the range where burrs can be removed.

2. Decrease rotational speed

Decrease the rotational speed in 10 to 20% increments within the range where burrs can be removed.

If the surface becomes rough

Check the Brush color

Change the Brush with higher edge quality.
Edge quality of the Brush: Pink > Red > White > Blue
Make sure to select appropriate Brush color based on the workpiece material and burr root thickness.

To improve surface roughness

1. Check the Brush color

Make sure to select appropriate Brush color.
Edge quality of the Brush 
: Pink > Red > White > Blue

2. Wet machining

The tool can be used for both dry and wet (oil-based and water-soluble) machining.
Wet machining may improve surface roughness and tool life.

3. Increase the number of passes

When comparing in the same cycle time, increasing the number of passes makes bigger difference than decreasing feed rate.

XEBEC Brush™ Surface

Ideal for deburring, cutter mark removal and surface polishing.

→Details










Related links

Download successful applications