Maintenance

XEBEC Self-Adjusting Sleeve™

How to clean sleeve main body

1. Remove the guide sleeve by loosening four pieces of the guide sleeve fixing bolts.
2. Remove the brush holder
3. Apply grease after cleaning/wiping outside of the screw rod/brush holder and inside of the guide sleeve with parts cleaner.

*Recommended grease: Lithium soap grease (NLGI#2)

4. Return the brush holder to the screw rod and check that location of the two holes on the guide sleeve and cover plate match properly.
5. Tighten four pieces of M5 guide sleeve fixing bolts at the torque 3N・m by using torque wrenches.

* Please confirm in advance that there is no deflection before use. Please confirm also that there is no loose screws, etc. after machining for a while.

Related links

Download successful applications