If the tip is worn out, form it with a diamond disc blade or grinder.
You can also customize the shape depending on the application or workpiece shape.
To shape the tip of the rod type finer, mount the tool on a rotary tool and rotate it for forming.
To cut off the tool, make a cut in both sides of the tool using a diamond disc blade etc.
Before processing, please read “Operation safety measures” below and follow it without fail.
Always wear protective goggles, gloves and masks when using the tool.
Wear long sleeves, tight cuff, and clothing to minimize skin exposure.
Cutting particles and burrs may scatter within the work area as the tools rotates.
Please stay clear of the area.
The area around your work is hazardous in case flying pieces of fiber rods from the tools and grinding powder may scatter.
Enclose your working area to prevent other people from entering or have them wear protective equipment as well.
Follow the precautions for use and operation safety measures without fail.
If you fail to observe them, there are following risks.
*A tool or a part of tool may crack, drop off, distort or break.
*Broken pieces of a tool or grinding dust may stick into your skin, or at worst stick into yours eyes, causing loss of sight.
*Dust generated by machining process may bring up skin irritancy or allergy.
