When using XEBEC Ceramic Stone Meister Finish Stick Type, apply the tip at about 45 degrees to the surface to be polished, as it only has grinding power at the tip. As for the Rod Type, the cutting edges are exposed over the entire surface, and it has grinding power both at the tip and all sides. XEBEC Ceramic Stone Diamond also has grinding power both at the tip and all sides.
No. Only the tip of this product has grinding power. When polishing, it should be applied to the workpiece at an angle, optimally at 45 degrees.
It is because of the characteristics of the ceramic fiber filament that self-sharpens to maintain the grinding power at the tip.
No. It is resistant to breakage, cracking, and chipping, because ceramic fiber filament is used as the abrasive material instead of abrasive grains.
No. It is capable of achieving rough to medium finish.
Yes, it can also used with water-soluble and oil-based grinding fluids and kerosene. Polishing liquids for metals are recommended.
It can be used with ultrasonic, pneumatic and electric tools. When using ultrasonic tools, XEBEC Ceramic Stone Heat-Resistant is recommended.
It is applicable with all metals with less than HRC57 of hardness, as well as mold materials including NAK and STAVAX. For materials with hardness of HRC57 and higher, use XEBEC Ceramic Stone Diamond.
No, it is not possible.
It can hold thicknesses of 0.5-3mm.
Diamond disc blade is recommended.