This is a special order item. We will need you to fill in the Deburring Information Sheet to provide us with details of your application. We will then determine whether this product is applicable. It consists of following 3 components: Brush, Resin Collar, and Shank. Resin Collar is custom made specifically to fit the customer application. Please contact us at: https://www.xebec-tech.com/en/contact/
No. The ceramic fiber filament works as abrasive material.
The Brush utilizes ceramic fiber filament as the abrasive material. Unlike wire and nylon brushes, it does not deform. Since it retains its original shape, XEBEC Brush is an optimal tool for CNC deburring and polishing.
Ceramic fiber filaments that maintain an overwhelming grinding power at the tip are woven to form the bristle of the Brush. The Brush length shortens as it wears, but the ceramic fiber filaments self-sharpen. Theoretically, the grinding power of the ceramic fiber filament does not change up to the base of the Brush, but as the bristle becomes shorter due to wear, the bristle becomes stiffer and it becomes difficult for the Brush to flare open sufficiently.
No. XEBEC Brushes do not contain abrasive grains that cause it. However, if dust and sludge accumulate, the performance of this product may be affected. It is recommended to wash them off.
XEBEC Brush is capable of removing burrs with root thickness of 0.1mm or burrs that can be easily removed with fingernails.
Burrs that are easily removable with fingernails.
Yes, it can. However, depending on the material, it may cause the workpiece to deform or to discolor. If deformation or discoloration becomes a problem, it may be possible to improve it by setting the rotational speed to about 1/10 of the recommended initial condition.
It can withstand temperatures up to 150 degree Celsius. The binder of the Brush is made of resin, and it cannot withstand higher temperatures.
If the tool cannot be rotated, the grinding power cannot be sufficient to remove burrs in most cases. We recommend using a lathe with a milling function.
Different colors indicate different grinding powers to aid the selection of the optimal tool, depending on the material and burr sizes. The ratio of the grinding powers is Red: Blue: 100: 600.
Yes, we are able to offer drawings in PDF format. Please send us your request at: https://www.xebec-tech.com/en/contact/
*Please note that we are unable to offer drawings in any CAD data file such as dxf file.
Either is fine, although wet machining produces a better surface finish quality and helps to improve the tool life. This product can be used with both oil-based and water-soluble coolant.
We may be able to introduce you to a manufacturer. Please contact us at: https://www.xebec-tech.com/en/contact/
We do not make any machine tool, but we may be able to introduce you to a manufacturer. Please contact us at: https://www.xebec-tech.com/en/contact/
Wash the Brush lightly with water and then use an air blower to completely remove dust and coolant.
Diamond disc blade is recommended.