| Tool | |
|---|---|
| Problem | It was necessary to design machining line under the prerequisite that deburring is automated. |
| Tool | XEBEC Brush Surface (A13-CB15M) |
|---|---|
| Result | Fully automated deburring in a machining center enabled stable and efficient deburring. |
| Industry | Electronics |
|---|---|
| Part name | Smartphone (Body) |
| Material type | Aluminium and plastic based complex material |
| Machining process | End milling |
| Tool | XEBEC Brush Surface (A13-CB15M) |
|---|---|
| Details of processing | Deburring after end milling process |
| Rotational speed (min⁻¹) | 3,000 |
| Feed rate (mm/min) | 4,000 |
| Depth of cut (mm) | 0.5 |
| Machining time (sec) | – |
