Tool | Grindstone |
---|---|
Problem | It took time for deburring due to the complicated design of workpiece. Resulted in unstable edge quality. |
Tool | XEBEC Brush Surface (A21-CB25M) |
---|---|
Result | By the introduction of automated deburring, 1 operator can operate the multiple machining centers. |
Industry | Aerospace |
---|---|
Part name | Blisk |
Material type | Inconel |
Cutting process | Ball end mill processing |
Tool | XEBEC Brush Surface (A21-CB25M) |
---|---|
Details of processing | Deburring after ball-end milling process |
Rotational speed (min⁻¹) | 4,000 |
Feed rate (mm/min) | 2,400 |
Depth of cut (mm) | 0.5 |
Machining time (sec) | – |