| Tool | Abrasive-impregnated nylon brush |
|---|---|
| Problem | Burrs left due to low grinding power. Additional manual deburring processing was required. |
| Tool | XEBEC Brush Surface (A11-CB40M) |
|---|---|
| Result | By the introduction of XEBEC Brush, deburring in a shorter time realized. |
| Industry | Automotive |
|---|---|
| Part name | Transmission (Matching surface) |
| Material type | ADC12 |
| Machining process | Front cutter processing |
| Tool | XEBEC Brush Surface (A11-CB40M) |
|---|---|
| Details of processing | Deburring of the matching surface after face milling process. |
| Rotational speed (min⁻¹) | 2,160 |
| Feed rate (mm/min) | 7,000 |
| Depth of cut (mm) | 0.5 |
| Machining time (sec) | – |
