| Tool | Abrasive-impregnated nylon brush |
|---|---|
| Problem | Nylon brushes did not have enough grinding power. On the other hand, grindstones did not fit well to workpieces and burr remained. Therefore, deburring could not be automated. |
| Tool | XEBEC Brush for Surface (A32-CB25M) |
|---|---|
| Result | No burrs left. Full automation process realized. |
| Industry | Automotive |
|---|---|
| Part name | Ring plate |
| Material type | SPH |
| Machining process | Others |
| Tool | XEBEC Brush for Surface (A31-CB25M) |
|---|---|
| Details of processing | Deburring outer edge after pressing |
| Rotational speed (min⁻¹) | 4000 |
| Feed rate (mm/min) | – |
| Depth of cut (mm) | 0.5 |
| Machining time (sec) | – |
