Tool | Plastic brush |
---|---|
Problem | The brush edge deformed. The inner diameter of cross hole H7 could not be maintained. Mass production machining was not possible. |
Tool | XEBEC Brush for Surface (A11-CB60M) |
---|---|
Result | Deburring with maintaining the inner edge profile of cross hole H7 without deformation realized. Quality requirement achieved. Also, tool life 65000 pcs/brush realized. |
Industry | Automotive |
---|---|
Part name | Plate |
Material type | SPH440 |
Cutting process | Others |
Tool | XEBEC Brush for Surface (A11-CB60M) |
---|---|
Details of processing | Deburring the external circumference edge and (4) bores. |
Rotational speed (min⁻¹) | 900 |
Feed rate (mm/min) | – |
Depth of cut (mm) | 1 |
Machining time (sec) | 3 sec |