Cylinder head(matching surface)

Effects after installation

Before
Tool

Abrasives-impregnated nylon brush

Problem

Deburring took long hours and burrs still remained after processing due to low grinding power. Moreover, workpiece was contaminated by Nylon brushes which needed to be cleaned up.

After
Tool

XEBEC Brush for Surface (A11-CB100M)

Effect

High-feed processing shortened cycle time. Coolant had less than a third of stain that had had before which saved the trouble of cleaning.

Workpiece information
Industry

Automotive

Part name

Cylinder head(matching surface)

Material type

ADC12

Cutting process

Front cutter processing

Processing conditions
Tool

XEBEC Brush for Surface (A11-CB100M)

Processing detail

Deburring of the matching surface after face milling process.

Spindle Speed (min⁻¹)

1350

Table Feed (mm/min)

2000

Depth of cut (mm)

0.5

Machining time (sec)

XEBEC Brush™ Surface

Ideal for deburring, cutter mark removal and polishing on surface

If you have any inquiry, please do not hesitate to contact us.