| Tool | Cutter, sandpaper |
|---|---|
| Problem | Manual deburring caused unstable quality and high labor cost. |
| Tool | XEBEC Brush for Surface (A31-CB25M) |
|---|---|
| Result | Fully automated deburring enabled stable quality and shorter processing time. Also the efficiency of processing improved by changing the burr direction by review of pre-process. |
| Industry | Automotive |
|---|---|
| Part name | Yoke |
| Material type | SUS430 |
| Machining process | Chamfering |
| Tool | XEBEC Brush for Surface (A31-CB25M) |
|---|---|
| Details of processing | Deburring the section after chamfering process |
| Rotation speed (min-1) | 3,000 |
| Feed rate (mm/min) | – |
| Depth of cut (mm) | 1 |
| Machining time (sec) | – |
