| Tool | Sandpaper |
|---|---|
| Problem | It took time for deburring. Secondary burrs occurred in the φ1.2 holes sometimes. |
| Tool | XEBEC Brush for Surface (A11-CB40M) |
|---|---|
| Result | Shorter deburring cycle time and stable quality realized. |
| Industry | General Machinery |
|---|---|
| Part name | Jig plate |
| Material type | Alminium |
| Cutting process | Drilling |
| Tool | XEBEC Brush for Surface (A11-CB40M) |
|---|---|
| Details of processing | Deburring after drilling with φ1.2mm tool |
| Spindle speed (min⁻¹) | 2,000 |
| Table feed (mm/min) | 4,000 |
| Depth of cut (mm) | 0.5 |
| Machining time (sec) | – |
