| Tool | Abrasive-impregnated nylon brush |
|---|---|
| Problem | Burrs remained and full inspection required, resulting in high labor cost. |
| Tool | XEBEC Brush for Surface (A11-CB15M), XEBEC Floating Holder (FH-ST12) |
|---|---|
| Result | No burr remaining realized by automated deburring with machining center. Besides, this enabled introduction of random sampling instead of full inspection and cost reduction achieved. Surface roughness of processed area improved. |
| Industry | Automotive |
|---|---|
| Part name | Injector body (Nozzles) |
| Material type | SCM |
| Machining process | Drilling |
| Tool | XEBEC Brush for Surface (A11-CB15M)/ |
|---|---|
| XEBEC Brush for Surface (A11-CB15M)/ XEBEC Floating Holder (FH-ST12) | Deburring the edge face after drilling process |
| Spindle speed (min⁻¹) | 2,000 |
| Table feed (mm/min) | – |
| Depth of cut (mm) | 4 |
| Machining time (sec) | – |
