| Tool | Plastic brush |
|---|---|
| Problem | The brush edge deformed. The inner diameter of cross hole H7 could not be maintained. Mass production machining was not possible. |
| Tool | XEBEC Brush for Surface (A11-CB60M) |
|---|---|
| Result | Deburring with maintaining the inner edge profile of cross hole H7 without deformation realized. Quality requirement achieved. Also, tool life 65000 pcs/brush realized. |
| Industry | Automotive |
|---|---|
| Part name | Plate |
| Material type | SPH440 |
| Cutting process | Others |
| Tool | XEBEC Brush for Surface (A11-CB60M) |
|---|---|
| Details of processing | Deburring the external circumference edge and (4) bores. |
| Spindle speed (min⁻¹) | 900 |
| Table feed (mm/min) | – |
| Depth of cut (mm) | 1 |
| Machining time (sec) | 3 sec |
