| Tool | Abrasive-impregnated nylon brush |
|---|---|
| Problem | It took long hours for deburring and burrs still remained after processing due to low grinding power. Moreover, workpiece was stained by nylon brushes and man-hour is required for cleaning. |
| Tool | XEBEC Brush for Surface (A11-CB100M) |
|---|---|
| Result | Shorter cycle time was realized by high-feed processing. Coolant contamination was reduced to one third and man-hour for cleaning saved. |
| Industry | Automotive |
|---|---|
| Part name | Cylinder head (Matching surface) |
| Material type | ADC12 |
| Machining process | Face milling processing |
| Tool | XEBEC Brush for Surface (A11-CB100M) |
|---|---|
| Details of processing | Deburring of the matching surface after face milling process. |
| Spindle speed (min⁻¹) | 1350 |
| Table feed (mm/min) | 2000 |
| Depth of cut (mm) | 0.5 |
| Machining time (sec) | – |
