Tool | Cutter, sandpaper |
---|---|
Problem | Manual deburring caused unstable quality and high labor cost. |
Tool | XEBEC Brush for Surface (A31-CB25M) |
---|---|
Result | Fully automated deburring enabled stable quality and shorter processing time. Also the efficiency of processing improved by changing the burr direction by review of pre-process. |
Industry | Automotive |
---|---|
Part name | Yoke |
Material type | SUS430 |
Machining process | Chamfering |
Tool | XEBEC Brush for Surface (A31-CB25M) |
---|---|
Details of processing | Deburring the section after chamfering process |
Rotation speed (min-1) | 3,000 |
Feed rate (mm/min) | – |
Depth of cut (mm) | 1 |
Machining time (sec) | – |