For Your Safety
前のページに戻る
XEBEC XEBEC Back Burr Cutter & Deburring Tool Path™ Instruction Manual (For Machining Center)
Expand all
XEBEC XEBEC Back Burr Cutter & Deburring Tool Path™ Instruction Manual (For Machining Center)
For Your Safety
Safety Precautions
Regular Maintenance
Introduction
Product Overview
Contents of the Product
Features
Applicable Equipment
Target Edges to Deburr
Product Specifications
XEBEC Back Burr Cutter Specifications
XEBEC Back Burr Cutter Standard Machining Parameters
XEBEC Deburring Tool Path Data Format
Tool Length Offset
Max Allowed Accumulated Variance (mm)
Start Point
How to Implement XEBEC Deburring Tool Path
Incremental (INC) Positioning Format
Absolute Positioning (ABS) Format
Specifications of Cross Hole Types
Cross Hole Types
Type A: Orthogonal Cross Hole - Outer Diameter (Cutter Insertion Hole < Outer Diameter)
Type B: Orthogonal Cross Hole - Inner Diameter (Cutter Insertion Hole ≦ Cross Hole)
Type C: Flat Surface Hole
Type D and E: Angled Cross Hole (On-center) - Outer/Inner Diameter
Type D and E: Angled Cross Hole (Off-center) - Outer/Inner Diameter
Type F: Angled Surface Hole
Type G and H: Slotted Hole Parallel with Cross Hole Axis (On-center) - Outer/Inner Diameter (ar=0°)
Type G and H: Slotted Hole Parallel with Cross Hole Axis (Off-center) - Outer/Inner Diameter (ar=0°)
Type G and H: Slotted Hole Parallel with Cross Hole Axis Aligned with X-axis (ar＝90°/-90°)
Type I and J: Slotted Hole Perpendicular with Cross Hole Axis (On-center) - Outer/Inner Diameter
Type I and J: Slotted Hole Perpendicular with Cross Hole Axis (Off-center) - Outer/Inner Diameter
Type I and J: Slotted Hole Perpendicular with Cross Hole Axis Aligned with X-axis (ar＝90°/-90°)
Type K: Orthogonal Cross Hole - Inner Diameter (Cutter Insertion Hole > Cross Hole)
Type K: Orthogonal Cross Hole Aligned with X-axis (ar＝90°/-90°)
Type L: Broken Hole - Inner Diameter (Cutter Insertion Hole ≦ Cross Hole)
Type M: Broken Hole - Inner Diameter (Cutter Insertion Hole ＞ Cross Hole)
Type N: Angled Cross Hole Inner Diameter (On-center) - (Cutter Insertion Hole > Cross Hole)
Type N: Angled Cross Hole Inner Diamater (Off-center) - (Cutter Insertion Hole > Cross Hole)
Type P: Tapped Orthogonal Cross Hole (Cutter Insertion Hole ≦ Cross Hole)
Type Q: Tapped Flat Surface Hole
Type R: Tapped Angled Surface Hole
